Einbaurahmen Lautsprecher als dxf-Datei?

  • fesy
  • fesys Avatar
  • Fresh Boarder
  • Fresh Boarder
  • Beiträge: 44
  • Dank erhalten: 0
08 Feb 2014 18:46 #62060 von fesy
Einbaurahmen Lautsprecher als dxf-Datei?
Hi,

das ist der Originalstopfen. Das Problem ist, dass der zu kurz ist wenn man die Original-Gummimatten drin lässt und dann noch den Teppich drauflegt. Ich denke 10 mm länger müsste passen.
Es wäre natürlich schon hilfreich wenn man den im Original zu einem vernünftigen Preis beziehen könnte. Röno ist da einfach zu teuer.
Gruß
Dirk

Ich bin ein bisschen Twizy und was ist Deine Ausrede?

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

  • TWIZY PR
  • TWIZY PRs Avatar
  • Fresh Boarder
  • Fresh Boarder
  • Beiträge: 1
  • Dank erhalten: 0
08 Mär 2025 09:09 #266750 von TWIZY PR
Einbaurahmen Lautsprecher als dxf-Datei?
Hallo Leute,
Hat jemand eine DXF von der Lautsprecher Halterung?
Vielen Dank.
Mfg.Alexander

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

  • Akku61
  • Akku61s Avatar
  • Moderator
  • Moderator
  • Moderator sein heißt andere verstehen lernen.
  • Beiträge: 3907
  • Dank erhalten: 3235
08 Mär 2025 18:13 - 08 Mär 2025 18:15 #266766 von Akku61
Einbaurahmen Lautsprecher als dxf-Datei?

Viele Grüße, Andreas
Twizy color 08-2012 | Twizy Sport 04-2015 | Panoramadach | ToM Twiz ‘o meter | Heckfolien | Schmutzfänger
Tesla Model 3 - long-range, Heckantrieb | PV-Strom | green-planet-energy
Letzte Änderung: 08 Mär 2025 18:15 von Akku61.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

  • Frummel
  • Frummels Avatar
  • Fresh Boarder
  • Fresh Boarder
  • Beiträge: 5
  • Dank erhalten: 2
01 Feb 2026 11:17 #277094 von Frummel
Einbaurahmen Lautsprecher als dxf-Datei?
I must say that the speaker mounting was a very satisfying Twizy upgrade. I used the 3D printed speaker mounts from Simoninns . 2 mounts just clicking into the 'roof beam', the third with a single screw into an existing hole (which doesn't seem to have any thread prepared). Speaker cables to the roof are already present, so with a standard speaker adapter cable, speakers are connected in a jiffy. I also added some damping material between the speakers, don't know if it helps, but it doesn't harm either.
At the hand brake side I had to search a bit, but indeed the ISO connectors are present: L+R speaker on one connector and gnd+12V+12V ignition on the other (check which is which, as there are 2 'standards'). I've opted for a headless audio solution, just a bluetooth amplifier with all the control (inc volume) on your telephone. I think many alternative exist, this is mine:
  • Pioneer TS-G1020F 2-way speakers (10cm)
  • 2x30W bluetooth amplifier (Dutch link) Dutch link
My experience is that audio quality is OK when standing still (maybe some equalizer could reduce the high tones and increase bass). However at speed the noise from the Twizy is increasingly getting louder than the music likes. So probably for good sound, a set of (noise cancelling) earplugs is a better solution :-) But to have your navigation tell you where to go with a clear voice is great.
Anhänge:

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

  • TwizyChrisy
  • TwizyChrisys Avatar
  • 10k Boarder
  • 10k Boarder
  • Der Trend geht klar zum Zweittwizy äähhh....
  • Beiträge: 20283
  • Dank erhalten: 12875
01 Feb 2026 12:25 #277097 von TwizyChrisy
Einbaurahmen Lautsprecher als dxf-Datei?

Frummel schrieb: . However at speed the noise from the Twizy is increasingly getting louder than the music likes. So probably for good sound, a set of (noise cancelling) earplugs is a better solution :-) .


Option 2 ist making musik loud again :-) Until it's louder than the Twizy. And trust me.... that works :-)
But if you are a wimpy don't look at the faces oft the people you drive by :-)

Mehr Twizys, mehr Freude.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

   Become a Patron